
4.13 KEW6305
“Setting 11” Time period setting (Time setting)
Following explains how to set recording start / stop time.
1 Use the Cursor key on the selection screen, and select “Setting 11”.
2 Press the ENTER key to get the instrument into setting change mode.
3 Then second for recording stop time will blink.
4 Select the time parameter to be changed and change it with Cursor Key.
5 Then press the ENTER key after making necessary change.
* Start time is displayed on the upper line and stop time is on the lower line.
NOTE:
This setting item will not be displayed if Setting 10 has been set to “OFF”.
Kommentare zu diesen Handbüchern