Kyoritsu 6305 Instruction Manual Bedienungsanleitung PDF herunterladen (Seite 33)

KEW6305 4.6

“Setting 04” Current range

Selectable Current range differs by clamp sensor selected at “Setting 03”.

Clamp sensor (“Setting 03”) Current range

50A (M-8128) 1 / 5 / 10 / 25 / 50A / AUTO

100A (M-8127) 2 / 10 / 20 / 50 / 100A / AUTO

200A (M-8126) 4 / 20 / 40 / 100 / 200A / AUTO

500A (M-8125) 10 / 50 / 100 / 250 / 500A / AUTO

1000A (M-8124) 20 / 100 / 200 / 500 / 1000A / AUTO

3000A 300 / 1000 / 3000A

Default value (or after system reset) AUTO

* Selecting “AUTO” activates auto-ranging function and the measuring range will be automatically

switched between the lowest and highest ranges.

1 Use the Cursor key on the selection screen, and select “Setting 04”.

2 Press the ENTER key to get the instrument into setting change mode.

3 Present setting (or default value: AUTO) blinks. Select the appropriate current range with the Cursor

key, and then press the ENTER key after making necessary change.

NOTE:

* When a type of clamp sensor (“Setting 04”) is changed, current range may be changed to the

corresponding range automatically.

* Accurate results may not be obtained if the Clamp sensors in use do not match the setting done for

sensor.

* Using the auto-ranging function can measure wide range of input signals, however, accurate results

may not be obtained when measuring loads that flactuate so widely within 1 sec..

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 137 138

Keine Kommentare

Kyoritsu 6305 Instruction Manual Bedienungsanleitung Seite 33