Kyoritsu 6010B Bedienungsanleitung PDF herunterladen (Seite 11)

LED indication of live Illuminates if there is an alternating voltage of 20V

circuit warning AC or more in the circuit under test before Continuity

or Insulation resistance tests. When DC voltage is

detected across the measuring terminal the LED

lights up.

LED indication of The P-E and P-N LEDs illuminate when the wiring of

correct polarity the circuit under test is correct. The reverse LED

" " is lit when P and N are reversed.

Display The liquid crystal display has 3 1/2 digits with a

decimal point and units of measurement (Ω, MΩ, V,

mA and ms) relative to selected function.

Overload protection The continuity test circuit is protected by a 0.5 A 600

V fast acting (HRC) ceramic fuse mounted in the

battery compartment, where a spare fuse is also

stored.

The insulation resistance test circuit is protected by

a resistor against 1200 V AC for 10 seconds.

Mains Voltage On connecting test leads to the circuit under test at

Indication Loop, RCD and Uc ranges, the LCD reads VL-PE.

Indications are as follow:

Less than 100V : "Lo v"

100V~259V : voltage value and " "

260V~300V : voltage value and "Hi v"

alternately, and " "

Over than 300V : "Hi v" and " "

―

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Keine Kommentare

Kyoritsu 6010B Bedienungsanleitung Seite 11