Kyoritsu 5000 Instruction Manual Bedienungsanleitung PDF herunterladen (Seite 17)

―

Following operations are available during a recording.

* Display the measured value at each channel button

* Recording state: Display the max. recorded value

→Refer to

(2) Confirmation of recorded data (status 1)

described

in the supplied Quick manual.

* Recording state: Display RECALL

→Refer to

(3) Confirmation of recorded data (status 2)

described

in the supplied Quick manual.

* Confirm the setting value at Setting1 "SEt.1" and Setting2 "SEt.2".

Following operations are NOT available during a recording.

* Power off the instrument.

* Switch measurement ranges.

* Change the setting value at Setting1 "SEt.1" and Setting2 "SEt.2".

* Communication with PC

Stop the recording once to do above operations.

The recording ends automatically when One-time system has been set to

"ON" at "

Step2: Confirmation and change of the set value

1. Press the button at least 1 sec. to

stop the recording.

2. Recording stops, and the "REC" mark

disappears. Then the instrument goes

back into measurement state.

Now recording is complete.

* Press the button at least 1 sec. to power off the instrument.

Step5: Stop of recording

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

Keine Kommentare

Kyoritsu 5000 Instruction Manual Bedienungsanleitung Seite 17