Kyoritsu 6017 Bedienungsanleitung

INSTRUCTION MANUALANALOGUE INSULATION EARTH TESTERMODEL 6017¡6018KYORITSU ELECTRICAL INSTRUMENTSWORKS, LTD

84. Instrument Layout④ ③ ○24○24○21○22○25② ① ⑮ ⑭ ⑤ ⑦ ⑧ ⑥ ⑬ ⑫ ⑨ ⑪ ⑯ ⑰ ⑲ ○23⑱ ⑳ ⑩ ①METER ZERO ADJUSTER②TEST BUTTON ③SCALE PLATE④METER POINTER⑤INSULAT

95. Preparation for Measurement5-1 Installing BatteriesWARNING¡To avoid possible electric shock hazard, set the function selector switch tothe OFF pos

105-2 Mechanical Zero AdjustmentWith the function selector switch set to the OFF position and without pressing thetest button, turn the zero adjuster

115-4 Battery Voltage Check1. Set the function selector switch to the BATT CHECK position.2. Press the test button or the remote control switch.3. If

125-6 Scale Illumination FunctionTo facilitate working in dimly lit situations, a function to illuminate the scale plate isprovided. To operate this

135-8 Fitting Case Lid Under Case1.Open the case lid as shown.2.Turn it 180 degrees.3.Put the case under the housing case.4.Hook it onto the housing c

146-1 AC Voltage Measurement (Mains Disconnection Check) An AC voltage range is provided for mains voltage measurement. If any voltage ispresent on t

151. Set the function selector switch to AC600V. Connect the earth probe (alligatorclip on black lead) to earth of the circuit under test and the lin

166-2 Insulation Resistance MeasurementThe insulation resistance function is used for insulation check on electricappliances, wiring systems, etc. The

172. Check the maximum voltage that may be applied to the circuit under test. Setthe function selector switch to an appropriate insulation resistance

1. Safety Warnings ---------------------------------------------------------------------------- 12. Features -----------------------------------------

186-3 Continuous Insulation Resistance MeasurementA lock down feature is incorporated on the test button. Pressing and turning itclockwise lock the b

196-5 Earth Resistance MeasurementThe earth resistance function is used to check that equipment is properly earthedto provide appropriate protection a

20Make sure to drive the auxiliary earth spikes in the moist part of the earth. Giveenough water if the auxiliary earth spikes have to be stuck into

21CAUTION¡When earth voltage is more than 10V, accurate earth resistancemeasurement can not be made. Reduce the earth voltage, for example,by detachi

22When making earth resistance measurement using a wall outlet, which is on thesecondary side of mains power supply, use a probe with a blade type pro

23Note:¡When mains power supply that includes a residual current circuit breaker isused for simplified measurement, the circuit breaker does not trip

247. Test Prods for Line Probe and Replacement1. Types of test prodsModel 8072: Standard Test Prod Used in ordinary situations. This type of prod is

258. Adapters for Earth Lead and Replacement1. Types of earth lead adaptersModel 7131: Safety Alligator Clip Used to connect to an earth terminal, in

269. Optional AccessoriesModel 7100 Test Lead Set for Precision Earth ResistanceMeasurement (includes Test Leads, Carrying Case,Cord Reels, Auxiliary

2710. Cleaning Meter CoverDo not try to remove dirt on the meter cover by rubbing hard with a dry cloth. Thiscan remove anti-electrostatic agent appl

11. Safety WarningsThis instruction manual contains warnings and safety rules which must beobserved by the user to ensure safe operation of the instru

2811. Before Sending for RepairUse the following troubleshooting guide for hints on problems with instrumentoperation.When using the instrument, alway

29MEMO

DISTRIBUTOR92―1428B99―06Kyoritsu reserves the rights to change specifications ordesigns described in this manual without notice and withoutobligations

2DANGER¡Never make measurement on a circuit above 600VAC or DC. ¡Do not attempt to make measurement in the presence of flammabl

32. FeaturesModel 6017/6018 (KEW-MEG-EARTH) are a versatile tester designed forinsulation and earth resistance measurements on low voltage installatio

43. Specifications3-1 StandardsDesigned to meet:IEC 61557-2: Insulation TesterIEC 61557-5: Earth Resistance TesterIEC 61010-1 over-voltage category CA

53-4 Earth Resistance Ranges and Accuracy: Simplified MeasurementFunctionMeasuring RangeAccuracyOutput current is the same as in precision measurement

63-8 General Specifications¡Operating Temperature¡Storage Temperature¡Response Time¡Effect of Temperature¡AC Component in MeasuringTerminal Voltage(In

7¡Dimensions¡Weight¡Accessories¡Optional Accessories: Instrument Body 130(L)x183(W)x100(D)mm.: Approx. 1000g (batteries included).: Model 7103 Test