Kyoritsu 2009R Bedienungsanleitung PDF herunterladen (Seite 26)

７．Other Functions

７－１ Auto-power-off Function

 CAUTION

● The instrument consumes small amount of battery power in the

Auto-power-off mode. Make sure to set the function selector

switch to the OFF position after use.

This is a function to prevent the instrument from being left powered

on in order to conserve battery life. This function causes the

instrument to enter the Auto-power-off mode about 1

0 minutes

after the last switch or button operation.

To exit the Auto-power-off mode, turn the function selector switch

back to "OFF", then to any other position, or press any button.

NOTE

● Connecting the plug to the OUTPUT terminal disables the Auto-

power-off function. The function is enabled on removing the plug

from the terminal.

● The Auto -power-off f unction is disable d in the P EAK

measurement mode.

７－２ Data Hold Function

This is a function used to freeze the measured value on the

display.

Press the Data Hold button to freeze the reading. The reading will

be held regardless of subsequent variation in input. "

" is shown

on the upper right corner of the display while the instrument is in

the Data Hold mode.

To exit the Data Hold mode, press the Data Hold button again.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33

Keine Kommentare

Kyoritsu 2009R Bedienungsanleitung Seite 26